Split-Collets

Used to mount Turbosand or Turboflex sanding heads on spindles, our split-collets center and lock in place to prevent run-out and prevent slipping. The collets are designed to mate with the 60° conical tapers on the thru-bore and are not used with heads that have a straight-thru bore. Split collets are available to fit any shaft or arbor diameter common in the wood-machining market. Standard sizes are shown here. Contact our representatives for information on parts for unusual diameters or specific applications foryour machine.

Spindle DiaStandard ColletCut-Down Collet
"ID"("T"=.507in)("T"=.307in)
3/4"AT-1513-01AT-2984-01
7/8"AT-1513-02AT-2984-02
1"AT-1513-04AT-2984-04
1-1/8"AT-1513-05AT-2984-05
1-3/16”AT-1513-11
1-1/4"AT-1513-06AT-2984-06
1-3/8"AT-1548-02AT-2628-02
1-1/2"AT-1548-03AT-2628-03
1-3/4”AT-5590-01-
16mmAT-1513-10-
20mmAT-1513-09-
24mmAT-1513-12-
25mmAT-1513-03AT-2984-03
28mmAT-1513-07AT-2984-07
30mmAT-1513-08AT-2984-08
32mmAT-1548-07-
35mmAT-1548-04AT-2628-04
40mmAT-1548-05AT-2628-05
50mmAT-5590-02
Picture of Collets

Spindle Spacers

Standard spacers & shims available. These items are used to fill-in space on spindles or arbors or to adjust the positioning of the mounted sanding heads along the length of the shaft. The table at right shows some of our most commonly used spacers. We manufacture spacers to fit several spindle diameters not listed here; if you need a size not listed in the table, you can order them directly from a sales representative or dealer

Spindle DiaSpacer ODSpacer ThicknessPart Number
1"1-1/2".250AT-5224-01
.500AT-5224-02
1.000AT-5224-03
.750AT-5224-04
.1250AT-5224-05
1-1/4"1-5/8".250AT-1055-01
.500AT-1055-02
.750AT-1055-03
1.000AT-1055-04
.3750AT-1055-05
.125AT-1055-06
1.500AT-1055-07
0.435AT-1055-08
30mm1.525;.250AT-4150-01
.500AT-4150-02
.750AT-4150-03
1.000AT-4150-04
.3750AT-4150-05
.125AT-4150-06
1.500AT-4150-07
0.343AT-1055-08
.550AT-4150-09
.843AT-4150-10
.640AT-4150-11
.063AT-1055-12
1-1/2"1-5/8".250AT-4785-01
.500AT-4785-02
.750AT-4785-03
1.000AT-4785-04
.3750AT-4785-05
.125AT-4785-06
1.500AT-4785-07
0.435AT-4785-08
Picture of spacers